MX5Link - MX5NB2X

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

Designed for the Facelift MX5 NB (MY2001-2005, VVT Naturally Aspirated Engines and non-VVT Mazdaspeed Turbo 1.8L)

Please check your connector matches the header in the listed photo before purchasing.

This ECU works for manual transmissions only.

Includes onboard 7 bar MAP sensor

Most factory features are supported

Check the features tab for I/O expansion options

Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.

G4X PlugIn Key Features (where applicable):

Up to 6D fuel and ignition mapping

Precision closed loop cam control (four cam, independent control)

Sequential fuel delivery

Digital triggering, all OEM patterns

OEM idle hardware supported

5D boost control with three switchable tables

Motorsport features - antilag, launch, flat shift

Continuous barometric correction (on board)

CAN port

QuickTune - automated fuel tuning

Individual cylinder correction

USB tuning cable included

Stats recording into on-board memory

Gear compensations for spark, boost and fuel

Real time selectable dual fuel, ignition and boost maps

Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical

Boost control referenced to gear, speed or throttle position

512 mega bytes data logging memory

Staged injection

Knock with "windowing"

I/O Expansion Options:

The following expansion connector inputs/outputs are provided:

Expansion Connector 1

Pin 1                Ground (signal)

Pin 2                +14 out

Pin 3                An Temp 4

Pin 4                An Temp 3

Pin 5                DI10

Pin 6                DI9

Pin 7                IGN3

Pin 8                IGN4

E-Throttle Connector

Pin 1                Ground (signal)

Pin 2                +5V out

Pin 3                An Volt 12

Pin 4                An Volt 11

Pin 5                An Volt 10

Pin 6                An Volt 9

Pin 7                Aux 10

Pin 8                Aux 9

Sku: 101-0226

The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost pressure, air/fuel ratio, coolant temperature, fuel pressure, ethanol content, etc. can be displayed.

The high contrast OLED display is bright for interior use and dims at night. Configure 1, 2, or 4 gauge layouts on up to 10 different pages. Pages can be scrolled through using the easy to access front buttons. Create customizable warning points, such as the coolant temperature being too high, which trigger a special warning screen and bright LED on the face of the gauge.

Easily customize your CAN Gauge to display the data you want to see with the free to download app (compatible with Android 4.4 or later and Apple iOS). The easy-to-use app works with your smartphone or tablet to wirelessly customize your gauge in minutes and is a lot easier than trying to configure your gauge with only buttons on the front!

Box Contents

1 x 52mm OLED CAN Gauge

1 x DTM4 CAN Gauge Connection Cable

1 x DTM4 Mating Connector Kit

1 x Mounting Bracket

1 x Quickstart Guide

Displays real time data, direct from your Link ECU.

Has a high contrast OLED display, which dims at night.

Fully customisable screens, 1,2 or 4 up, on up to ten different pages.

Customisable warning screens & LED light for low or high warnings such as low oil pressureor high boost pressure.

Pre-configured to work with all Link G4+/G4X/G5 Wire-In and Plugin ECU's.

Configurable via Smart Phone with included app.

Compact 52mm (2 inch) size in high quality injection moulded housing.

Connect two or more together in a daisy chain.

Extremely easy to install and use.

Compatible with Link CAN Connection Cables